c写php扩展之编译php源码,创建扩展模块,编写扩展demo
用c写php扩展实属无奈,要用到16进制数据进行异或,偏移;php操作实在麻烦,不得已,决定自己写一个简单的动态库进行调用; 环境:ubuntu10.0.4
1.下载php源代码
http://www.php.net/downloads.php
2.编译php源代码
在写扩展之前需要编译源代码,不然后期要用的phpize无法找到; 具体:
1.安装编译php所需要的库文件
sudo apt-get -y install libevent libevent-devel libxml2 libxml2-devel libmcrypt libmcrypt-devel libmcrypt libmcrypt-devel curl-devel ?libpng-devel libtool-ltdl-devel
2.安装gcc
用于编译php yum -y install gcc
3.cd 到php源码所在目录
4.具体编译
- 1.tar?zxvf?php-5.3.10.tar.gz
- 2.cd?php-5.3.10
- 3.配置?编译选项
- ./configure?--prefix=/usr/local/php?\
- ?--enable-fpm?\
- ?--with-fpm-user=fpm?\
- ?--with-fpm-group=fpm?\
- ?--with-mysql=mysqlnd?\
- ?--with-mysqli=mysqlnd?\
- ?--with-pdo-mysql=mysqlnd?\
- ?--without-pdo-sqlite?\
- ?--without-sqlite3?\
- ?--without-sqlite?\
- ?--with-mysql-sock=/tmp/mysql.sock?\
- ?--with-curl?\
- ?--enable-mbstring?\
- ?--with-mhash?\
- ?--with-mcrypt?\
- ?--with-openssl?\
- ?--with-gd?\
- ?--enable-sockets?\
- ?--with-gettext?\
- ?--with-zlib?\
- ?--enable-zip?\
- ?--enable-soap?\
- ?--with-xmlrpc
- 不出意外,最后应该会看到以下结果:
- +--------------------------------------------------------------------+
- ?|?License:?|
- ?|?This?software?is?subject?to?the?PHP?License,?available?in?this?|
- ?|?distribution?in?the?file?LICENSE.?By?continuing?this?installation?|
- ?|?process,?you?are?bound?by?the?terms?of?this?license?agreement.?|
- ?|?If?you?do?not?agree?with?the?terms?of?this?license,?you?must?abort?|
- ?|?the?installation?process?at?this?point.?|
- ?+--------------------------------------------------------------------+
- Thank?you?for?using?PHP.
编译常见问题
错误一: configure: error: xml2-config not found. Please check your libxml2 installation. 而我已经安装过了libxml2,但是还是有这个提示: 解决办法:
# sudo apt-get install libxml2-dev
错误二: configure: error: Please reinstall the BZip2 distribution 而我也已经安装了bzip2,网上找到得解决方案都是需要安装bzip2-dev,可是11.10里面没有这个库。 解决办法:在网上找到bzip2-1.0.5.tar.gz,解压,直接make ,sudo make install.(我使用的该源来自于http://ishare.iask.sina.com.cn/f/9769001.html) 错误三: configure: error: Please reinstall the libcurl distribution -easy.h should be in <curl-dir>/include/curl/ 解决办法:
# sudo apt-get install libcurl4-gnutls-dev
错误四: configure: error: jpeglib.h not found. 解决办法:
# sudo apt-get install libjpeg-dev
错误五: configure: error: png.h not found. 解决办法:
# su do apt-get install libpng-dev
错误六: configure: error: libXpm.(a|so) not found. 解决办法:
# sudo apt-get install libxpm-dev
错误七: configure: error: freetype.h not found. 解决办法:
# sudo apt-get install libfreetype6-dev
错误八: configure: error: Your t1lib distribution is not installed correctly. Please reinstall it. 解决办法:
# sudo apt-get install libt1-dev
错误九: configure: error: mcrypt.h not found. Please reinstall libmcrypt. 解决办法:
# sudo apt-get install libmcrypt-dev
错误十: configure: error: Cannot find MySQL header files under yes. Note that the MySQL client library is not bundled anymore! 解决办法:
# sudo apt-get install libmysql++-dev
错误十一: configure: error: xslt-config not found. Please reinstall the libxslt >= 1.1.0 distribution 解决办法:
# sudo apt-get install libxslt1-dev
可见PHP源码安装之前需要先安装这些依赖,详细可见http://forum.ubuntu.org.cn/viewtopic.php?f=88&t=231159 如上错误都解决之后,再次./config....没有错误之后,
# make # sudo make install
5.make
//编译源码,漫长的一个过程,休息下先去喝杯茶再回来
成功后会看到:
Build complete. Don't forget to run 'make test'.
6.make install
如果安装成功,就此php源码编译成功;
7.使用c程序添加php扩展
扩展方式有两种: 1.编译为.so库通过php.ini进行动态加载; 2.静态编译到php库中; 本次使用动态库方式;
1.生成扩展模块
创建的模块为socketCheck? 主要是为了给发送socket字符串时前3为加校验字符; 1.cd ~/php-5.3.15/ext/ 2.执行./ext_skel --extname=socketCheck? ,将在该目录生成 ~/php-5.3.15/ext/socketCheck 3.首先编辑 config.m4 文件,去掉第16行和第18行的注释(注释符号为 dnl 。) 16:? PHP_ARG_ENABLE(hello, whether to enable hello support, 17:? dnl Make sure that the comment is aligned: 18:? [? --enable-hello?????????? Enable hello support]) 然后执行 phpize 程序,生成configure脚本: 3.通过phpize生产configure编译工具 注意:/usr/local/php/bin/phpize 工具是通过前面编译php源代码生成,相对目录为编译源代码时设置的路径 步骤如下: 正常情况下 zhuse7en@ubuntu:~/php-5.3.15/ext/socketCheck$ /usr/local/php/bin/phpize Configuring for: PHP Api Version:???????? 20090626 Zend Module Api No:????? 20090626 Zend Extension Api No:?? 220090626 错误: zhuse7en@ubuntu:~/php-5.3.15/ext/socketCheck$ /usr/local/php/bin/phpize Configuring for: PHP Api Version:???????? 20090626 Zend Module Api No:????? 20090626 Zend Extension Api No:?? 220090626 Cannot find autoconf. Please check your autoconf installation and the $PHP_AUTOCONF environment variable. Then, rerun this script. 解决方法:?sudo apt-get install autoconf?? 进行安装autoconf,安装完毕后再进行phpize;
2.修改扩展模块
1.打开 php_socketCheck.h,在 PHP_FUNCTION(confirm_socketCheck_compiled); 之下加入函数声明:
- PHP_FUNCTION(socketCheck);
2.打开 socketCheck.c,在zend_function_entry socketCheck_functions[]加入以下内容。
- zend_function_entry?socketCheck_functions[]?=?{
- ????PHP_FE(hello_add,???NULL)???????/*?For?testing,?remove?later.?*/
- ????PHP_FE_END????/*?Must?be?the?last?line?in?socketCheck_functions[]?*/
- };
3然后在 socketCheck.c 的最末尾书写socketCheck函数的内容(该函数就是我们需要的函数及具体实现)
- ????PHP_FUNCTION(socketCheck)
- ????{
- ??????char?*arg?=?NULL;
- ????int?arg_len,?len;
- ????char?*strg;
- ????if?(zend_parse_parameters(ZEND_NUM_ARGS()?TSRMLS_CC,?"s",?&arg,?&arg_len)?==?FAILURE)?{
- ????????return;
- ????}
- ????len?=?spprintf(&strg,?0,?"Congratulations!?You?have?successfully?modified?ext/%.78s/config.m4.?Module?%.78s?is?now?compiled?into?PHP.",?"socketCheck",?arg);
- ????RETURN_STRINGL(strg,?len,?0);
- }
3.编译扩展模块
1.配置
./configure --with-php --with-php-config=/usr/local/php/bin/php-config
2.编译 make 3.安装 ?make install 4.扩展模块存放目录及配置生效
socketCheck.so 也已放到了php的扩展目录和(~/php-5.3.15/ext/socketCheck/modules)下 如果要是扩展模块可以调用,那么需要做两步操作: 1.配置文件添加扩展
打开php.ini 添加一行 extension=socketCheck.so 2.将socketCheck.so 拷贝到php默认的扩展目录,本机默认为(/usr/lib/php/modules) 3.重启apache 4.通过phpinfo()函数检查扩展是否加载成功; 或者
/usr/local/php/bin/php?-m|grep socketCheck查看是否有 socketCheck.so